Raising the Bobbin Thread
Now that you have wound the bobbin and
threaded the needle, you will need to raise the
bobbin thread through the hole n the needle
plate.
1, Hold needle thread lightly with left hand
and turn hand wheel slowly toward you so
that needle enters needle plate.
2. Continue turning hand wheel and holding
needle thread until needle rises and brings
up bobbin thread in a loop.
3. Undo the loop with your fingers.
4. Place both needle and bobbin threads under
the presser foot and lay them diagonally to
the right.
25
To Next Page
Loading...
Need help?
General
