10
Powering Your Machine
GETTING READY TO SEW
Connect the machine to a power source as illustrated. This machine is equipped with a polarized plug
which must be used with the appropriate polarized outlet. (a and b)
⚠ Unplug power cord when machine is not in use.
Foot Control
The foot control regulates the sewing speed. When foot control is disconnected, the machine will not
operate.
Sewing Light
Press main switch (A) to “ I ” for power and light.
⚠ For machine with a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to t in a polarized outlet only one way. If it does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied electrician to install the proper outlet.
Do not modify the plug in any way.
⚠ Your SINGER
®
machine is adjusted to provide the best stitch results at normal room
temperature. Extreme hot and cold temperatures can affect the sewing results.
⚠ After switching off, residual power may still remain in the machine. This may cause the light to
stay on for a few seconds while the power is consumed. This is normal behavior for an energy efcient
appliance.
A
To Next Page
Loading...
Need help?
General
