ID of the telephone's wireless charging function » page 93 (applies to In-
fotainment Columbus)
The PIN code was not entered for the sim card inserted in the external
module or in the telephone connected to Infotainment by the Bluetooth
®
profile rSAP (applies to Infotainment Columbus with the SIM card slot in
the external module)/the SIM card inserted in the CarStick device (ap-
plies to Infotainment Amundsen).
Telephone
Applies to Infotainment Swing.
Fig. 194
Telephone: Main menu
The Telephone main menu appears when a telephone is connected to Infotain-
ment.
›
To display, press the
button.
To display the Telephone main menu if a different menu is displayed, which
was open last, press the
button again.
Main menu - Information and function surfaces » Fig. 194
Name of the connected phone (by tapping the list of paired phones dis-
played)
Functional surfaces of preferred contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the sym-
bol appears before the name )
Enter the telephone number
Display the telephone contact list » page 168
Display the call list (missed calls, in addition to the function surface, the
number of calls when missed is displayed)
A
B
C
D
Starting voice control of the connected phone (e.g. Siri, Google Voice)
Settings for the Telephone menu » page 145
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
Pairing and connecting
Introduction to the subject
The range of the connection to Infotainment is limited to the passenger com-
partment.
To connect a telephone with Infotainment, the two devices must be paired via
Bluetooth
®
.
The pairing process is dependent on the number of phones that are already
connected or on the use of the SIM card inserted in the external module (ap-
plies to Infotainment Columbus) » page 165.
Depending on the Infotainment model, up to 20 external devices can be paired
with the device. After reaching the maximum number, the pairing of the next
external device will replace that of the device that has not been used for the
longest period of time.
A connection with a telephone that is already paired does not require pairing. It
is enough to find the telephone that has been paired in the list of paired
phones and make the connection.
WARNING
Pair and connect a telephone to Infotainment only when the vehicle is at a
standstill - there is risk of an accident!
163
Telephone
To Next Page
Loading...
Need help?
General
