Smartgen HGM400 Series User Manual

HGM400 Series Genset Controller User Manual
HGM400 Series Genset Controller ISSUE 2015-05-27 Version 1.6 Page 8 of 44
3 SPECIFICATION
Items
Contents
Working Voltage
DC8. 0V to 35. 0V, Continuous Power Supply.
Overall Consumption
<3W(Standby mode: ≤2W)
AC voltage Input:
3 Phase 4 Wire
2 Phase 3 Wire
Single phase 2 Wire
3 Phase 3 Wire
AC15V - AC360V (ph-N)
AC15V - AC360V (ph-N)
AC15V - AC360V (ph-N)
AC30V - AC620V (ph-ph)
Alternator Frequency
50Hz/60 Hz
Speed Sensor Voltage
1.0V to 24V (RMS)
Speed Sensor Frequency
10,000 Hz (max)
Start Relay Output
5A DC28V power supply
Auxiliary Relay Output 1
5A DC28V power supply
Auxiliary Relay Output 2
5A DC28V power supply
Auxiliary Relay Output 3
5A DC28V power supply
Auxiliary Relay Output 4
5A AC250V voltage-free output
Auxiliary Relay Output 5
5A AC250V voltage-free output
Overall Dimensions
130mm x 112mm x 39mm
Panel Cutout
110mm x 90mm
CT Secondary Current
5A (rated)
Working Condition
Temperature: (-25~70)ºC;
Humidity: (20~93)%RH
Storage Condition
Temperature: (-25~70)ºC
Protection Level
IP55 Gasket
Insulation Intensity
Apply AC2.2kV voltage between high voltage
terminal and low voltage terminal;
The leakage current is not more than 3mA within
1min.
Weight
0.26kg

Smartgen HGM400 Series Specifications

General

Brand	Smartgen
Model	HGM400 Series
Category	Controller
Language	English