SMC Networks JXC51 User Manual

- 15 -
No.JXC※-OMX0011-A
(4) Power ON alarm (error)
Ensure the stop is not activated and then supply 24 VDC power.
Function
LED status
Status
PW R
Green LED is ON.
Normal
ALM
OFF
No alarm is generated.
If the LED [PWR] lights in green, the controller is in the normal condition.
However, if the LED [ALM] lights in red, the controller is in the alarm (error) condition.
Caution
When an alarm is generated, connect the controller configuration software or teaching box to the SI:
serial I/O connector. Then, remove the cause of the error referring to the
12. Alarm Detection.
Please refer to the manuals of the controller setting software or the teaching box for details of the
alarms.
(5) Operation pattern setting
Set up the step data and parameters using the controller set up software or the teaching box.
●Controller set up software ●Teaching box
Please refer to the manuals of the controller setting software or the teaching box for how to setup
the operation pattern.
(6) Trial run
Please refer to the manuals of the controller setting software or the teaching box manual for how to
perform a trial run.
Controller

SMC Networks JXC51 Specifications

General

Brand	SMC Networks
Model	JXC51
Category	Controller
Language	English