SMC Networks JXCP1 User Manual

- 39 -
●Byte12,13: Acceleration
Byte
Signal name
Description
Input range
Min. unit
12
Acceleration
1 ~ Basic parameters (5, 7,11)
"Maximum acceleration/deceleration speed"
1mm/s
2
13
●Byte14,15: Deceleration
Byte
Signal name
Description
Input range
Min. unit
14
Deceleration
1 ~ Basic parameters (5, 7, 11)
"Maximum deceleration speed"
1mm/s
2
15
●Byte16,17: Pushing force
Byte
Signal name
Description
Input range
Min. unit
16
Pushing force
(5, 7, 11)
1%
17
●Byte18,19: Trigger LV
Byte
Signal name
Description
Input range
Min. unit
18
Trigger LV
(5, 7, 11)
1%
19
●Byte20,21: Pushing speed
Byte
Signal name
Description
Input range
Min. unit
20
Pushing speed
(5, 7, 11)
1mm/s
21
●Byte22,23: Moving force
Byte
Signal name
Description
Input range
Min. unit
22
Moving force
(5, 7, 11)
1%
23
●Byte24-27: AREA 1
Byte
Signal name
Description
Input range
Min. unit
24
AREA 1
Basic parameter
"Stroke (-)" - "Stroke (+)" (5, 7, 11)
0.01mm
25
26
27

5 Please refer to 21. Handling of sent/received data (P.84) for handling of the data.
7 Change the numerical data input flag and the numerical data, when the start flag is OFF. If the
numerical data input flag and the numerical data are changed when the start flag is ON, it might lead
to unexpected operation.
11 The actuator model determines the limit for the input values. Please refer to the manual of the
actuator for more details.

SMC Networks JXCP1 Specifications

General

Brand	SMC Networks
Model	JXCP1
Category	Controller
Language	English