Configuring the Gateway’s mso Interface
119
SMCD3GNV Wireless Cable Modem Gateway User Manual
MAC Filter Settings
Figure 66 shows the MAC filter settings on the WiFi menu, and Table 31 describes the fields
shown.
Figure 66. Wireless Menu – MAC Filter Settings
Table 31. Wireless Menu – MAC Filter Settings
Option Description
SSID Network name of the of the primary wireless carrier.
MAC Filtering Mode Use MAC Filtering Mode to allow or deny all or certain wireless devices within the LAN from
accessing the Internet. You can either manually add a MAC address or select the MAC
address from the list of auto-learned wireless devices. The choices are:
• Allow- All = all wireless client stations can connect to the Internet. (default)
• Allow = allow only the wireless client stations in the Wireless Control List to connect to the
Internet.
• Deny = deny the wireless client stations in the Wireless Control List from connecting to the
Internet.
Wireless Control List Shows up to 16 wireless devices whose MAC addresses you have added.
Auto-Learned Wireless Devices Shows the wireless devices whose presence the Gateway has automatically learned.
Manually-Added Wireless Devices Enter a unique name and MAC address of the wireless devices that you want to manually add
to the Wireless Control List, then click Add to add the device.
SAVE FILTER SETTING button Click this button to save your changes to the MAC filter settings.
To Next Page
Loading...
Need help?
General
