SMC Networks SMCD3GNV User Manual

Installing the Gateway
23
SMCD3GNV Wireless Cable Modem Gateway User Manual
Powering on the Gateway
After making your connections, use the following procedure to power on the Gateway:
1. Connect the supplied power cord to the power port on the rear panel of the Gateway (see
Figure 2 on page 15).
2. Connect the other end of the power adapter to a working power outlet. The Gateway
powers on automatically, the POWER LED on the front panel goes ON, and the other front
panel LEDs show the Gateway’s status (see Table 1 on page 14).
WARNING: Only use the power cord supplied with the Gateway. Using a different power cord
can damage the Gateway and void the warranty.

SMC Networks SMCD3GNV Specifications

General

Brand	SMC Networks
Model	SMCD3GNV
Category	Gateway
Language	English