Configuring the Gateway’s mso Interface
121
SMCD3GNV Wireless Cable Modem Gateway User Manual
Connect to Your WPS-Supported Device
Figure 68 shows the WiFI client setup configuration settings on the WiFi menu, and Table 33
describes the fields shown.
Figure 68. Wireless Menu – Connect to Your WPS-Supported Device Settings
Table 33. Wireless Menu – Connect to Your WPS-Supported Device Settings
Option Description
Push Button Click this option to use the WPS button on the top panel of the Gateway to configure WPS
(see Figure 3).
PIN Number Click this option if you need to enter a PIN to configure WPS.
Enter Wireless Client’s PIN If you clicked PIN Number, enter the PIN in this field.
PAIR WITH MY WIFI CLIENT button Click this button to pair (connect) the Gateway’s Wi-Fi settings with your Wi-Fi client.
Viewing XFINITY Network Information
The XFINITY Network menu is a read-only screen that displays:
XFINITY network settings
Initialization procedure information, including cable modem and downstream channel
bonding values
The information shown on this menu automatically updates (refreshes) every 10 seconds.
To display the XFINITY Network menu, click Gateway > Connection > XFINITY Network in
the menu bar. Figure 69 shows an example of the XFINITY Network menu.
To Next Page
Loading...
Need help?
General
