Configuring the Gateway’s mso Interface
136
SMCD3GNV Wireless Cable Modem Gateway User Manual
Manually Adding Computers with Static IP Addresses
To manually add a computer with a static IP address to the Gateway’s LAN, perform the
following procedure from the Computers menu.
1. Under Online Computers, click the ADD COMPUTER WITH STATIC IP button. The Add
Computer menu appears (see Figure 80).
2. Complete the fields in the Add Computer menu (see Table 38).
3. Click SAVE to save your settings (or click CANCEL to discard them). If you click SAVE,
the Computer menu reappears, with the computer you added displayed under Offline
Computers.
4. To add more computers with static IP addresses, repeat steps 1 through 3.
5. To edit an online computer, click the EDIT button next to the computer you want to modify,
edit the settings on the Edit Computer menu (see Figure 81 and Table 39), and click
SAVE.<<I did not see this button??>>
6. To delete an online or offline computer, click the X next to the computer. When the Delete
Computer message appears, click OK to delete the computer or CANCEL to retain it. If
you clicked OK, the computer is removed from the Computers menu.
Figure 80. Example of the Add Computer Menu
To Next Page
Loading...
Need help?
General
