Configuring the Gateway’s mso Interface
149
SMCD3GNV Wireless Cable Modem Gateway User Manual
Specifying Services to be Blocked
To block services for non-trusted computers, perform the following procedure from the
Managed Services menu.
1. Next to Enable Managed Services, click Enabled.
2. Under Blocked Services, click ADD. The Add Blocked Service menu appears (see Figure
88).
3. Complete the fields in the Add Blocked Service menu (see Table 44).
4. Click SAVE (or click CANCEL to discard your settings). If you clicked SAVE, the blocked
service appears below Blocked Services on the Managed Services menu.
5. To block additional services, repeat steps 2 through 4.
6. To edit a blocked service, click the EDIT button next to the blocked service you want to
modify, edit the settings on the Add Blocked Service menu (see Table 44), and click SAVE.
7. To delete a blocked service, click the X next to the service. When the Delete Service Block
Rule message appears, click OK to delete the blocked URL or CANCEL to retain it. If you
clicked OK, the service is removed from Blocked Services on the Managed Services
menu.
To Next Page
Loading...
Need help?
General
