How to manage the access rights* for users with lower access level
Use the navigator to go to menu item Transmit user data and ac-
tivate this menu item. The menu opposite will be displayed then.
Insert a formatted ZIP disk* or a writable CD* into the respect-
ive drive or connect a USB memory* (F 2-3), go to the corres-
ponding menu item Download data to ZIP disk, Download data to
CD or Download data to USB memory by means of the navigator
and activate this menu item. After your acknowledgement, the
data is copied.
If, besides the user data, the access rights* are to be transmit-
ted, proceed as you do when transmitting user data in Transmit
access rights.
After having left the menu, remove the disk or CD and insert it into the drive of the other X-ray unit or re-
move the USB memory and connect it to the USB plug of the second X-ray unit.
Here, call up the same menu(s) and activate the cor-
responding menu item Upload data from ZIP disk, Up-
load data from CD/DVD or Upload data from USB
memory. After your acknowledgement, the data is
copied to the hard disk of the second X-ray unit.
You will be logged out automatically and have to log in
again.
95587413 01/01/09 © Smiths Heimann
I
User data and access rights can be copied to the same
data carrier.
S
Attention!
All user data existing on the X-ray unit
so far will be deleted when starting the
upload! Before loading user data, en-
sure that these contain as well your data
with corresponding authorization! Oth-
erwise, you will no longer have access!
1450
2-21
To Next Page
Loading...
Need help?
General
