Name: Sony Alpha NEX-6
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Preparing the camera

Attaching/removing the lens

Set the power switch of the camera to OFF before you attach or remove the

lens.

• When attaching a lens, do not press the lens release button.

• Do not use excessive force when attaching a lens.

• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold

separately). For details, refer to the operating manual supplied with the Mount

Adaptor.

• When using a lens equipped with a tripod socket, attach the socket on the lens side

to the tripod to maintain balance.

If the cap or the packaging lid

is attached, remove it from the

camera or the lens.

• Quickly change the lens somewhere

away from dusty locations so as to

keep dust or debris from getting

inside the camera.

Mount the lens by aligning the

white index marks on the lens

and the camera.

• Hold the camera’s face downward

to prevent the dust from entering

into the camera.

While pushing the lens lightly

toward the camera, turn the

lens clockwise until it clicks

into the locked position.

• Be sure to put the lens on straight.

Notes

Questions and Answers:

Need help?

Do you have a question about the Sony Alpha NEX-6 and is the answer not in the manual?

Sony Alpha NEX-6 Specifications

General