Name: Sony Alpha NEX-6
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

182

Table of

contents

Sample photo Menu Index

Cleaning Mode

Allows you to clean the image sensor.

• A blower is not supplied with the camera. Use a commercially available blower.

• Cleaning can be performed only when the battery level is (3 remaining battery icons) or more. The

use of an AC-PW20 AC Adaptor (sold separately) is recommended.

• Do not use a spray type blower as it may scatter water droplets inside the camera body.

• Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower

does not touch the image sensor.

• Hold the camera’s face downward to prevent the dust from entering in the camera.

• Do not apply a mechanical shock to the camera during cleaning.

• When cleaning the image sensor with a blower, do not blow too hard.

1 MENU t [Setup] t [Cleaning Mode] t OK.

The message “After cleaning, turn camera off. Continue?” appears.

2 Select OK.

The anti-dust is activated automatically.

3 Turn the camera off.

4 Detach the lens.

5 Use the blower to clean the image sensor

surface and the surrounding area.

6 Attach the lens.

Notes

Questions and Answers:

Need help?

Do you have a question about the Sony Alpha NEX-6 and is the answer not in the manual?

Sony Alpha NEX-6 Specifications

General