Name: Sony Alpha NEX-6
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Others

Troubleshooting

If you experience trouble with the camera, try the following solutions.

The battery pack cannot be installed.

• When you insert the battery pack, use the tip of the battery pack to push the

lock lever (page 16).

• You can use an NP-FW50 battery pack only. Make sure that the battery is

NP-FW50.

The remaining battery level indicator shows incorrect level or

power runs out quickly despite the indicator showing sufficient

battery level.

• This phenomenon occurs when you use the camera in an extremely hot or

cold location.

• The battery pack is discharged. Install a charged battery pack (page 16).

• The battery pack is dead. Replace the battery pack with a new one.

Cannot turn the camera on.

• Install the battery pack correctly (page 16).

• The battery pack is discharged. Install a charged battery pack (page 16).

• The battery pack is dead. Replace the battery pack with a new one.

Check the items on pages 83 to 87. Also refer to

“α Handbook” (PDF).

Remove the battery pack, wait for about one minute, re-

insert the battery pack, and then turn on the power.

Reset the settings (page 61).

Consult your Sony dealer or local authorized Sony service

facility.

Battery pack and power

Questions and Answers:

Need help?

Do you have a question about the Sony Alpha NEX-6 and is the answer not in the manual?

Sony Alpha NEX-6 Specifications

General