4
— Getting started —
Using this manual
As you read through this manual, buttons and settings on your camcorder are shown in
capital letters.
e.g. Set the POWER switch to ON.
When you carry out an operation, you can hear a beep or a melody sound to indicate
that the operation is being carried out.
Note on cassette memory
Your camcorder is based on the DVCAM/DV format. We recommend that you use a
tape with cassette memory .
The functions which require different operations depending on whether or not the tape
has cassette memory are:
•Searching the end point of the recording – end search (p. 29, 33)
•Searching a recording by index – index search (p. 77)
•Searching a recording by date – date search (p. 80)
•Searching for a photo – photo search (p. 82).
The functions you can operate only with cassette memory are:
•Searching the boundaries of recorded tape by title – title search (p. 79)
•Superimposing a title (p. 110)
•Making your own titles (p. 114)
•Labeling a cassette (p. 116).
For details, see page 158.
You see this mark in the introduction of the features that are operated only with
cassette memory.
Tapes with cassette memory are marked with (Cassette Memory).
To Next Page
Loading...
Need help?
General
