DEMO (Demonstration)
Activates the demonstration: "ON," "OFF."
DIM (Dimmer)
Changes the display brightness: "ON,"
"OFF."
A.SCRL
*2
(Auto Scroll)
Scrolls long items automatically:
"ON,"
"OFF."
LOCAL
(Local Seek Mode)
- "ON": to only tune into stations with stronger
signals.
- "OFF": to tune normal reception.
MONO*3 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception:
"ON,"
"OFF."
Z.TIME*2 (Zappin Time)
Selects the playback time for the ZAPPIN
function.
- "Z.TIME-l (about 6 seconds)," "Z.TIME-2
(about 9 seconds)," "Z.TIME-3 (about
30 seconds)."
LPF
(Low Pass Filter)
Selects the subwoofer cut-offfrequency:
"OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
LPF
NORM/REV (Low Pass Filter Normall
Reverse)
Selects the phase when the LPF is on: "NORM,"
"REV."
HPF
(High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
LOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON,"
"OFF."
BTM (page 12)
DM+*2
To
set the DM+ function: "ON,""OFF."
BT
INIT*1 (page 19)
*I When the unit is turned off.
*2 When COIUSB source is activated.
*3 When FM is received.
Using
optional
equipment
Auxiliary
audio
equipment
By connecting an optional portable audio device
to the AUX input
jack
(stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Tum off the portable audio device.
2 Tum down the volume on the unit.
3 Connect to the unit.
....
Connecting
cord*
(not
supplied)
* Be sure to use a straight type plug.
Adjust
the volume level
Be
sure to adjust the volume for each connected
audio device before playback.
1 Tum down the volume on the unit.
2 Press
(SOURCE)
repeatedly until "AUX"
appears.
"AUX FRONT IN" appears.
3 Start playback
of
the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
S Adjust the input level (page 20).
-
21