71
GB
Table of
contents
Sample photo Menu Index
Object Tracking
Keeps the focusing on a moving subject while tracking it.
• Tracking may be difficult in the following situations:
– The subject is moving too quickly.
– The subject is too small, or too large.
– The contrast between the subject and the background is poor.
– It is dark.
– The ambient light changes.
• You cannot use [Object Tracking] with the following functions:
– [Sweep Panorama]
– [3D Sweep Panorama]
–[Manual Focus]
– [Prec. Dig. Zoom]
1 MENU t [Camera] t [Object Tracking] t
[On].
A target frame appears.
2 Align the target frame with the subject to be
tracked, and pres the center of the control
wheel.
The camera starts tracking the subject.
When [Object Tracking] is [On], you can start tracking
the subject by touching it on the screen.
To cancel this tracking feature, select .
3 Shoot the subject.
Target frame
On Tracks the subject to be focused on.
Off Does not track the subject. The camera focuses on the point you
touch on the screen.
Notes
z Tracking the face you want to shoot
The camera stops tracking a subject when the subject moves off of the screen. When the
subject to be tracked is a face, if the face disappears from the screen while the camera is
tracking, and then returns to the screen, the camera focuses on that face again.
• If you trigger Smile Shutter while tracking a face, the face becomes the target of the smile
detection feature.
To Next Page
Loading...
Need help?
General
