GB
25
Preparing the camera
Turning on the camera and setting up the
date
When you turn on the camera for the first time, the screen to set date and time
appears.
1
Set the power switch to ON to
turn on the camera.
The screen to set date and time
appears.
• To turn off the camera, set the
power switch to OFF.
2
Press the center of the control
wheel. Or, touch OK on the
screen.
3
Select your area by pressing
the right or left of the control
wheel and press the center.
4
Press the left or right of the
control wheel to select each
item, and press the top or
bottom, or turn it to select the
numeric value.
Daylight Svg.: Turns on or off the
daytime saving time setting.
Date Format: Selects the format to
display date.
• Midnight is indicated as 12:00 AM,
and noon as 12:00 PM.
To Next Page
Loading...
