129
GB
Table of
contents
Sample photo Menu Index
AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens, when using an
A-mount lens with the LA-EA2 Mount Adaptor (sold separately).
1 MENU t [Setup] t [AF Micro Adj.].
2 [AF Adjustment Setting] t [On].
3 [amount] t desired value t OK.
• It is recommended that you adjust the position under actual shooting conditions.
• When you attach a lens for which you have already registered a value, the registered value appears on the
screen. [±0] appears for lens for which a value has yet to be registered.
• If [–] appears, more than 30 lenses have been registered. If you want to register another lens, you must
first clear a value. Attach a lens of the value to be cleared and select [±0]. If you want to clear all
registered values, select [Clear].
• Use [AF Micro Adj.] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF Micro Adj.]
with other brands of lenses, the registered value may be affected.
• You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konika-Minolta lens of the same
specification.
AF Adjustment
Setting
Sets whether or not to use the [AF Micro Adj.] function. Select [On] to
use it.
amount Allows you to select an optimum value between –20 and +20.
Selecting a larger value shifts the autofocused position away from the
camera. Selecting a smaller value shifts the autofocused position
closer to the camera.
Clear Clears the value you set.
Notes
To Next Page
Loading...
Need help?
General
