72
GB
Table of
contents
Sample photo Menu Index
Aperture Priority
Blurs or sharpens things in front of and beyond the subject. You can adjust the aperture
value also during movie recording.
1 MENU t [Shoot Mode] t [Aperture Priority].
2 Select the desired value with the control dial L.
Smaller F-value: The subject is in focus, but things in front of and beyond the subject is
blurred.
Larger F-value: The subject and its foreground and background are all in focus.
3 Adjust the focus and shoot the subject.
The shutter speed is automatically adjusted to obtain proper exposure.
You can set the exposure compensation with the control dial R, and ISO with the control
wheel.
• You cannot select [Flash Off] and [Autoflash] in [Flash Mode]. When you want to fire the flash, press the
(flash pop-up) button to pop up the flash. When you do not fire the flash, push down the flash.
• If proper exposure cannot be obtained after the setup, when you press the shutter button halfway down,
the shutter speed blinks. Although you can shoot as it is, resetting is recommended.
• The brightness of the image on the LCD monitor may differ from the actual image being shot.
• When using an A-mount lens (sold separately), you can adjust the aperture when focusing manually
during movie recording.
Notes
z Aperture
Smaller F-value (opening the aperture) narrows the range that
is in focus. This allows you to put the subject in sharp focus
and blur things in front of and beyond the subject. (Depth of
field becomes shallower.)
Larger F-value (narrowing down the aperture) widens the range
that is in focus. This allows you to shoot the depth of the
scenery. (Depth of field becomes deeper.)
To Next Page
Loading...
Need help?
General
