Preparation
Basic Configuration by the Administrator
18
Basic Configuration by
the Administrator
You can monitor the camera image by logging in with
the initial conditions set for this network camera. You
can also set various functions according to the installing
position, network conditions or purpose of the camera.
We recommend you configure the following items
before monitoring images from the camera.
Setting contents Setting menu
Set the format of the image sent from the camera. Video codec Tab (page 40)
Select the White Balance mode according to the installation position. White balance (page 39)
Select the brightness of the image sent from the camera. Exposure (page 38)
Brightness (page 40)
Select the quality of the image sent from the camera. Video codec Tab (page 40)
Select the view size of the image. View size (page 21)
Synchronize the date and time of the camera with those of the computer. Date & time Tab (page 35)
Make the setting for sending the monitor image attached to an e-mail. e-Mail (SMTP) Menu (page 64)
Set the user access right for the camera. User Menu (page 60)
Set a place to be watched beforehand. Preset position Menu (page 61)
Prepare a panorama image. To create a full image (page 26)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
