101
US
Adjusting Settings
Easy Setup
Re-runs the Easy Setup to make the basic
settings. Follow the on-screen instructions
(page 49).
Speaker Settings
You can set up your viewing environment
(with the speaker system you are using) either
automatically or manually.
Performs the D.C.A.C. (Digital Cinema Auto
Calibration) function. This function allows
you to perform automatic calibration, such as
checking the connection between each speaker
and the receiver, adjusting the speaker level,
and measuring the distance of each speaker
from your seating position automatically.
Note
The measurement results will be overwritten and
saved on the currently selected position.
Lets you register three patterns for “Position,”
depending on the seating positions, listening
environment, and measurement conditions.
You can also select a calibration type to
compensate the each speaker.
Position
You can register more than one set of settings
for the listening environment or recall a set of
settings.
Select the “Position” for which you want to
register the measurement results on the
Auto Calibration Setup screen.
•Pos.1
•Pos.2
•Pos.3
Auto Calibration
Auto Calibration Setup
continued
To Next Page
Loading...
Need help?
General
