audio signals to be played with high-quality sound.
Note
This function works when [2ch Stereo], [Direct], [A.F.D.] or [Multi Stereo] is selected. However, this
function does not work in the following cases:
The [In-Ceiling Speaker Mode] function is being used.
[FM TUNER] or [AM TUNER] is selected as the input.
Linear PCM signals with a sampling frequency other than 44.1 kHz are being received.
Dolby Digital Plus, Dolby Digital EX, Dolby TrueHD, Dolby Atmos, DTS 96/24, DTS-ES Matrix 6.1,
DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS:X, or DTS:X Master Audio signals
are being received.
When [Zone2 Power] is set to [On] (depending on the Zone 2 or HDMI settings).
[122] Adjusting Settings Audio Setup
Enjoying clear and dynamic sound at a low volume
(Sound Optimizer)
You can enjoy clear and dynamic sound at low volume levels using the Sound Optimizer
function.
After Auto Calibration is performed, the sound level is optimized to suit your environment.
Note
This function does not work in the following cases:
[Direct] is being used and an analog input is selected.
[Pure Direct] is set to [On].
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of
the input signals, depending on the audio format.
Hint
You can also select [Sound Optimizer] in the [Audio Setup] menu.
[123] Adjusting Settings Audio Setup
Selecting a sound field (Sound Field)
You can select from a variety of sound field modes according to speaker connections or input
sources.
Select [Setup] - [Audio Setup] from the home menu.
1
Select [Digital Legato Linear].
2
Select the setting you want.
Auto 1: This function is available for lossy compression audio formats and analog
audio signals.
Auto 2: This function is available for Linear PCM signals, as well as lossy compression
audio formats and analog audio signals.
Off
3
Select [Sound Effects] - [Sound Optimizer] from the home menu.
1
Select the setting you want.
Normal: Adjusts for the reference level of a movie.
Low: Adjusts for a CD or other software whose average sound pressure level is
processed highly.
Off
2
Select [Setup] - [Audio Setup] from the home menu.
1
Select [Sound Field].
2
Select the sound field you want.
For details on each sound field, see the following topics.
2-channel/Direct sound mode
Auto Format Decoding (A.F.D.)
Movie mode
Multi Stereo
3
To Next Page
Loading...
Need help?
General
