[141] Adjusting Settings HDMI Setup
Speeding up the display when switching the HDMI
input (Fast View)
You can set the Fast View function for the HDMI inputs.
Note
This function is enabled only when [HDMI Out B Mode] is set to [Main].
If you select [Off], it takes more time for images to appear after switching the input. However, the
sound quality is improved because the receiver receives signals only from the selected HDMI input
jack.
[142] Adjusting Settings HDMI Setup
Setting HDMI signal formats (HDMI Signal Format)
You can select the signal format so that the receiver can receive high resolution 4K signals.
Note
When [Enhanced format] is selected, we recommend using a Premium High Speed HDMI Cable with
Ethernet that supports 18 Gbps.
When [Enhanced format] is selected, some devices (cable box or satellite box, Blu-ray Disc player,
and DVD player) does not work properly. In this case, select [Standard format].
If your TV has similar menu for high bandwidth video format, check the setting on the TV menu when
you select [Enhanced format] on this receiver. For details on the setting of the TV menu, refer to the
operating instructions of the TV.
You cannot apply the setting to the HDMI IN 6 (GAME) jack.
[143] Adjusting Settings Zone Setup
Setting up the receiver to enjoy sound in Zone 2/3
(Zone Controls)
You can set the power, input source, and volume level for Zone 2/3.
Select [Setup] - [HDMI Setup] from the home menu.
1
Select [Fast View].
2
Select the setting you want.
Auto: You can select HDMI input faster than normal selection.
Off: The Fast View function is not available.
3
Select [Setup] - [HDMI Setup] from the home menu.
1
Select [HDMI Signal Format].
2
Select the HDMI input you want to apply the setting from the HDMI IN 1, 2, 3, 4 or 5
jack.
3
Select the setting you want.
Standard format: If you do not receive high resolution 4K signals, select [Standard
format] usually.
Enhanced format: If you want to receive high resolution 4K signals, such as 4K/60p
4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc., select [Enhanced format].
4
Select [Setup] - [Zone Setup] from the home menu.
1
Select [Zone Controls].
2
Select the item you want, then set the item.
Zone2 Power: Turns on/off the power for Zone 2.
Zone2 Input: Selects the input source for Zone 2.
Zone2 Volume: Adjusts the volume level for Zone 2.
3
To Next Page
Loading...
Need help?
General
