Note
This function does not work in the following cases:
[FM TUNER] or [AM TUNER] is selected as the input.
The software of the receiver is being updated.
If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority.
[152] Adjusting Settings System Setup
Changing the volume display (Volume Display)
You can set the volume display on the TV screen and display panel.
[153] Adjusting Settings
System Setup
Switching the brightness of the display panel
(Dimmer)
You can switch the brightness of the display panel between 3 levels.
[154] Adjusting Settings
System Setup
Using the sleep timer (Sleep)
You can set the receiver to turn off automatically after a specified period of time.
Select [Auto Standby].
2
Select the setting you want.
On: The receiver switches to standby mode after approximately 20 minutes.
Off
3
Select [Setup] - [System Setup] from the home menu.
1
Select [Volume Display].
2
Select the setting you want.
Relative: Indicates the volume in dB.
Absolute: Indicates the number of steps.
3
Select [Setup] - [System Setup] from the home menu.
1
Select [Dimmer].
2
Select the setting you want.
Bright
Dark
Off
3
Select [Setup] - [System Setup] from the home menu.
1
Select [Sleep].
2
Set specified time.
2:00:00
1:30:00
1:00:00
0:30:00
Off
[SLEEP] lights up on the display panel of the receiver when sleep timer is being used.
3
To Next Page
Loading...
Need help?
General
