Back Back to Top Print
Go to Page Top
Digital Music Player
NW-E393/E394/E395
Your Walkman does not operate or the power does not turn on.
If you transfer a lot of content such as music to your Walkman at once, it will take time
to build the database on the Walkman. Therefore, it will take more than 1 minute until
the Walkman becomes operable again after you disconnect the Walkman from your
computer.
If the HOLD switch is set to the HOLD position, slide the switch to the opposite position.
If your Walkman contains moisture condensation, wait a few hours to let the Walkman
dry out.
If the remaining battery power is low or insufficient, charge the battery.
You cannot operate your Walkman while it is connected to a computer. Disconnect the
Walkman from the computer.
If your Walkman still does not operate after charging the battery, press the RESTART
button with a pen or a paper clip, etc., to restart the Walkman.
Related Topic
Help Guide
Troubleshooting
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
