Sony XKS-8440 User Manual

317
Time Settings
You can determine the execution time of an effect by
setting either the keyframe durations or the effect duration
(see page 298).
You can make execution time settings in the utility/
shotbox control block.
Setting the Keyframe Duration
Utility/shotbox control block
1 Press the [KF MCRO EDIT] button, then press the
[EDIT ENBL] button, turning it on orange.
2 Stop the effect on the keyframe for which you want to
set the duration.
The time from this keyframe to the following
keyframe is what you set.
3 Press the [KF DUR] button.
The display in the numeric keypad control block
shows “KF DUR” followed by the duration of the
current keyframe (seconds:frames).
4 Using the numeric keypad in the numeric keypad
control block, enter the timecode value, as a maximum
of four digits.
For example, to set 9 seconds and 20 frames, enter
920.
You can also use the [TRIM] button to enter a
difference value (see page 309).
5 Press the [ENTER] button to confirm the entry.
The keyframe duration may also be automatically
changed as a result of changing the effect duration.
For details, see “Time Settings” (page 298).
Setting the Effect Duration
1 Press the [KF MCRO EDIT] button, then press the
[EDIT ENBL] button, turning it on orange.
2 Press the [EFF DUR] button.
The display in the numeric keypad control block
shows “DUR” followed by the effect duration
(minutes:seconds:frames).
3 Using the numeric keypad in the numeric keypad
control block, enter the timecode value, as a maximum
of six digits.
For example, to set 3 minutes 7 seconds and 15 frames,
enter 30715.
You can also use the [TRIM] button to enter a
difference value (see page 309)
.
4 Press the [ENTER] button to confirm the entry.
The effect duration may also be changed by inserting
or deleting keyframes.
For details, see “Time Settings” (page 298).
Delay Setting
1 Press the [KF MCRO EDIT] button, then press the
[EDIT ENBL] button, turning it on orange.
2 Press the [DELAY] button.
The display in the numeric keypad control block
shows “DELAY” followed by the delay time
(seconds:frames).
3 Using the numeric keypad in the numeric keypad
control block, enter the timecode value, as a maximum
of four digits.
KF DUR button
EFF DUR button
KF MCRO EDIT button
EDIT ENBL button DELAY button
Note
Note

Sony XKS-8440 Specifications

General

Brand	Sony
Model	XKS-8440
Category	Switch
Language	English