6-1
Routine Maintenance Operator Manual 122994-513
6.1 General The sample preventive maintenance guide (Table 6-1) included in
this section should be used as a guideline for determining the fre-
quency of maintenance. This proves useful in helping ensure proper
maintenance of your glassware washer.
Maintenance procedures described in this section must be per-
formed as required at the suggested frequency. Indicated frequen-
cies are minimums and can be changed if glassware washer use
warrants.
If a problem occurs, refer to S
ECTION 7, TROUBLESHOOTING.
Refer to the Maintenance Manual (P764330-580) for complete
replacement parts list.
IMPORTANT: A listing of the Safety Precautions to be observed when operating and servicing this
glassware washer can be found in S
ECTION 1 of this manual. Do not operate the equipment until you have
become familiar with this information.
WARNING–PERSONAL INJURY
AND/OR EQUIPMENT DAMAGE
HAZARD:
• Regularly scheduled preven-
tive maintenance is required
for safe and reliable opera-
tion of this equipment. Con-
tact STERIS to schedule
preventive maintenance.
• Repairs and adjustments
to this equipment must be
made only by STERIS or
STERIS-trained service
personnel. Repairs and
adjustments performed by
unqualified personnel or
installation of unautho-
rized parts could cause
personal injury, result in
improper equipment per-
formance, void the war-
ranty or result in costly
damage. Contact STERIS
regarding service options.
WARNING–PERSONAL INJURY
HAZARD: Risk of pinch point
between door and upper
panel. Do not push on top
portion of doors; do not push
on door when door is rising;
do not push on door when
door is jammed.
ROUTINE MAINTENANCE
To Next Page
Loading...
Need help?
General
