EasyManuals Logo

Stiga Autoclip 720S User Manual

Stiga Autoclip 720S
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
41
User’s manual
EN
AUTOMATIC RETURN TO THE CHARGING STATION
The robot stops the work cycle if the following conditions are veri ed.
– Discharged batteries: The robot automatically returns to the charging station.
– Rain: In case of rain, the robot automatically returns to the charging station and starts ope-
rating again according to what has been programmed (see “Programming Mode”).
- Lawn mowed (only for some versions, see “Technical Speci cations): If the sensor de-
tects that the lawn has already been mowed, it automatically returns to the charging sta-
tion and starts operating again according to what has been programmed (see “Programming
Mode”).
- End of working time: At the end of the working time, the robot automatically returns to the
charging station and starts operating again according to what has been programmed (see
“Programming Mode”).
USE OF THE ROBOT IN CLOSED AREAS WITH NO CHARGING STATION
The start-up of the robot in “closed area”
mode is for mowing closed areas which are
delimited by the perimeter wire and which
have no charging station.
min. 100 cm
(39,37 inc.)
min. 100 cm
(39,37 inc.)
Carry the robot by the handle located on
the back. Use protective gloves to prevent
injuries to your hands.
Position the robot inside the work area at a minimum distance of 100 cm (39.37 inc.) from the
perimeter wire and from any other obstacle.
Warning - Caution

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stiga Autoclip 720S and is the answer not in the manual?

Stiga Autoclip 720S Specifications

General IconGeneral
BrandStiga
ModelAutoclip 720S
CategoryLawn Mower
LanguageEnglish

Related product manuals