Stihl FS 88 User Manual

STIHL Supercut 2-2
STIHL Supercut 20-2
• Lay your brushcutter on its back
with the gear head facing up.
• Screw mowing head counterclock-
wise onto the output shaft
(1) -
as far as it will go.
• Block the output shaft.
• Tighten down the mowing head
securely.
Important!
Remove the stop pin.
Keep instruction sheet for mowing
head in a safe place.
26
Removing mowing head
• Block the output shaft.
• Unscrew mowing head clockwise.
Adjusting nylon line
• Fresh line is advanced auto-
matically, providing at least
6cm/2.4" of line is still projecting
from the head.
Blade on deflector trims surplus line
to correct length.
• Fit new nylon line as described
in
instructions supplied with mowing
head.
STIHL Autocut 25-2
STIHL Autocut 30-2
• Lay your brushcutter on its back
with the gear head facing
up.
• Screw mowing head counterclock-
wise onto the output shaft
(1) -
as far as it will go.
• Block the output shaft.
--. Tighten down the mowing head
securely.
Important!
Remove the stop pin.
Removing mowing head
• Block the output shaft.
• Unscrew mowing head clockwise.
Keep instruction sheet for mowing
head in a safe place.

Stihl FS 88 Specifications

General

Brand	Stihl
Model	FS 88
Category	Brush Cutter
Language	English