Spark
Arresting
Screen
in
Muffler
Storing
the
Machine
1/
4
\
4
1(. I
•
0
l.1
•
4
4
II
\
~
(0
I
0
I 5
]
lo
I
0
If
the engine
is
low on power, check the
spark arresting screen inside the muffler.
• Pull off the spark plug
terminal (1).
• Take out shroud mounting
screws (2).
• Remove the shroud (3).
• Take out the screws (4).
• Remove the cover (5).
• Remove the spark arresting
screen (6).
• Clean spark arresting screen
if
necessary.
•
If
screen
is
damaged or coked up,
fit a new one.
• Refit the spark arresting screen.
• Fit the cover.
• Fit the shroud.
For periods of about 3 months or longer:
• Drain and clean the fuel tank.
• Run engine until carburetor
is
dry -
this helps prevent the carburetor
diaphragms sticking together.
• Remove, clean and inspect the
ClLtting
tool.
• . Thoroughly clean the machine -
pay special attention
to
the cylinder
fins and air filter.
• Store the machine
in
a
dry,
high or
locked location - out of the reach
of children and other unauthorized
persons.
51