Fueling
Fitting
the
Harness
Before fueling, clean the filler cap and
the area around it
to
ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your machi-
ne.
Change the fuel pick up body every year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is
dry.
Models with a loop handle come without
a harness (available as special acces-
sory for these models).
Shoulder strap
Use of the carrying strap is described
in chapters "Safety Precautions" and
"Selecting the Cutting Tool".
Warning!
In
order to reduce the risk of
bums or other personal injury from esca-
ping gas vapor and fumes, remove the
fuel filler cap carefully so as to allow any
pressure build-up
in
the tank
to
release
slowly.
Warning' After fueling, tighten fuel cap
as securely as possible by hand.
32
•
...., .
Put on the shoulder strap (1).
Adjust length until the spring
hook (3) rests against your right hip.
To Next Page
Loading...
Need help?
General
