Starting
1
• Observe safety precautions - see
section "Safety Precautions"
in
this
manual.
• Hold down the throttle trigger
interlock (1) and squeeze
the throttle trigger (2).
• Move the slide control (3)
to
START position.
• Now release the throttle trigger, slide
control and trigger interlock
in
that order = This
is
the
starting-throttle position.
34
If engine
is
cold:
Set the choke lever (4) to
.L
If
engine
is
warm:
Set the choke lever (4) to ...
Also use this setting il engine has been
running but
is
still cold.
• Put the unit on the ground:
It
must rest securely on the engine
support and deflector. Check that
the cutting tool
is
not touching the
ground or any other obstacles.
• Make sure you have a firm
looting: Hold the unit with you left
hand and press it down
firmly -
your thumb should
be
under the
housing.
• Do not stand or kneel
on
the drive
shaft!
To Next Page
Loading...
Need help?
General
