Stihl FS 88 User Manual

Definitions
8.
Throttle cable/stop switch wire.
16. Carburetor adjusting screws.
Connect operator's control grip to
For tuning carburetor.
1.
Handle support.
the powerhead.
Connects the drive shaft
to the handle bars.
17. Muffler.
9. Spark plug terminal. Attenuates exhaust noises
Connects the spark plug
to the and diverts exhaust gases away
2. Throttle trigger.
ignition wire. from operator.
Controls the speed of the engine.
10. Air filter cover. 18. Deflector.
3. Slide control.
Covers the air filter element.
The deflector
is designed to reduce
Starting throttle lock and stop switch.
the risk of injury from foreign objects
Keeps the throttle partially open
flung backwards toward the operator
during starting and switches the
11. Choke lever.
by the cutting tool and from contact
engine's ignition off and stops the Eases engine starting
with the cutting tool.
engine.
by enriching mixture.
19. Cutting tool.
4. Throttle trigger interlock. 12. Machine support.
The cutting attachment, i. e. blade,
Must
be depressed before the
For resting machine
on the ground.
made from metal for different pur-
throttle trigger can
be activated.
poses (special accessory).
13. Fuel tank.
5. Bike handle. For fuel and oil mixture.
To hold the brushcutter
with both hands.
14. Fuel filler cap.
.......>
For closing the fuel tank.
6. Throttle cable retainer.
Fixes the throtlle cable
on the drive shaft.
15. Starter grip.
The grip of the pull starter,
which
is the device to start
7. Carrying lOop. the engine.
The device to connect the
brushcutler to the harness.
3

Stihl FS 88 Specifications

General

Brand	Stihl
Model	FS 88
Category	Brush Cutter
Language	English