Stihl RMI 632 P User Manual

0478 131 8354 D - EN
28
9.7 Setting the language, date and time
● Pressing any button on the control
panel activates the machine and thus
the installation assistant.
Select the required display language
and confirm with the OK button.
Confirm your language selection
with the OK button or select
"Change" and repeat the language
selection.
● If necessary, enter the 9-digit serial
number of the robotic mower. This
number is printed on the identification
plate (sticker in compartment under
control panel).
Set the current date using the
control pad and confirm with the OK
button.
Set the current time using the
control pad and confirm with the OK
button.
9.8 Installing the docking station
● Connect the power cable to the docking
station. (Ö 9.3)
● Route the power cable under the floor
plate when the docking station is
installed at a wall. (Ö 9.1)
When navigating through the
menus, follow the instructions in the
"Operating instructions" section.
(Ö 11.1)
You can select options, menu items
and buttons using the control pad.
You can open submenus and
confirm selections using the
OK button.
Use the Back button to
leave the active menu or
jump one step back in the
installation assistant.
If errors or faults occur during the
initial installation, a corresponding
message appears on the display.
(Ö 23.)
Read the "Notes on the docking
station" section (Ö 9.1) and study
the installation examples (Ö 26.) in
this instruction manual.

Stihl RMI 632 P Specifications

General

Brand	Stihl
Model	RMI 632 P
Category	Lawn Mower
Language	English