EN
73
0478 131 8354 D - EN
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the machine as a result of
inadequate or incorrect cleaning,
– corrosive and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
The machine, its packaging and
accessories are all produced from
recyclable materials and must be disposed
of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal. (Ö 6.11)
Waste products such as
batteries must always be
disposed of properly. Observe
local regulations.
Do not dispose of lithium-ion
batteries with domestic waste.
Please hand them in to a
specialist dealer or at a
hazardous waste collection
point.
20.1 Removing the battery
● Activate the disabling device. (Ö 5.2)
Remove the screws (1) from the cover (2).
Remove the (2) cover upwards.
Remove the rotary knob (1) upwards.
20. Environmental protection
To Next Page
Loading...
Need help?
General
