0478 131 8354 D - EN
4
2.1 General
This instruction manual constitutes
original manufacturer's instructions in
the sense of EC Directive 2006/42/EC.
STIHL is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual may describe
models that are not available in all
countries.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
2.2 Country-specific versions
STIHL supplies machines with different
plugs and switches, depending on the
country of sale.
Machines with European plugs are shown
in the illustrations. Machines with other
types of plug are connected to the mains in
a similar way.
Setting the rain sensor 47
Setting the status screen 47
Installation 47
Setting starting points 48
Safety 49
Service 50
Information 50
Perimeter wire 52
Planning routing of the perimeter
wire 52
Making a sketch of the mowing
area 53
Routing the perimeter wire 53
Connecting the perimeter wire 53
Wire clearances – use
iMOW® Ruler 54
Acute corners 55
Confined areas 55
Installing linking sections 55
No-go areas 55
Secondary areas 56
Corridors 57
Guide loops for offset drive home 58
Accurate mowing along edges 59
Sloping terrain along the perimeter
wire 60
Installing reserve wire 60
Using wire connectors 60
Docking station 61
Docking station controls 61
Notes on mowing 62
General 62
Mulching 62
Active times 62
Mowing duration 62
Home area (RMI 632 C,
RMI 632 PC) 62
Manual mowing 63
Operating the machine 63
Preparation 63
Removing and installing the control
panel 63
Adapting the programming 64
Automatic mowing 64
Mowing independently of active
times 64
Manual mowing 65
Docking the robotic mower 65
Charging the battery 66
Maintenance 66
Maintenance schedule 66
Cleaning the machine 67
Checking the mowing blade wear
limits 67
Removing and installing the
mowing blade 68
Sharpening the mowing blade 69
Removing and installing the carrier
plate 69
Finding a wire break 69
Storage and winter break 70
Removing the docking station 71
Standard spare parts 72
Accessories 72
Minimising wear and preventing
damage 72
Environmental protection 73
Removing the battery 73
Transport 75
Lifting or carrying the machine 75
Securing the machine (lashing) 75
Technical specifications 75
Messages 76
Troubleshooting 83
Service schedule 87
Handover confirmation 87
Service confirmation 87
Installation examples 88
2. Notes on the instruction
manual
To Next Page
Loading...
Need help?
General
