2 Installation Quick User Manual
4
7. Prevent the inverter from direct exposure to sun, rain and snow.
8. Install at eye level for easy
inspection.
9. Install vertically for good heat
dissipation.
10. Never install the inverter horizontally, or with a forward tilt or with a
backward tilt or even with upside down. The horizontal installation can
result in damage to the inverter.
Forward tilt Backward tilt
Horizontally
Upside down
11. Refer to the following figure for the clearance requirements. For
multi-row installation, the distance between two adjacent rows should be
at least 400 mm.
400 mm 400 mm
400 mm
800 mm
2.2 Installing the Inverter
Inverter is installed on the wall by means of wall-mounting bracket and the
expansion plug sets.
The expansion plug set shown below is recommended for the installation. They
are not included in the delivery scope.
To Next Page
Loading...
Need help?
General