Supermicro X11SCL-IF User Manual

18
Super X11SCL-IF User's Manual
1.2 Processor and Chipset Overview
Built upon the functionality and capability of the Intel Xeon E-2100, 8th Generation Core
i3, Pentium, and Celeron series processor (Socket H4 - LGA 1151) and the Intel C242
chipset, the X11SCL-IF motherboard provides optimized system performance, efcient power
management, and features based on cutting edge technology to address the needs of next-
generation computer users. The X11SCL-IF offers maximum I/O exibility and data reliability
in a 14-nm process architecture and is ideal for entry-level computing, SMB and micro server
platforms.
The Intel Xeon E-2100, 8th Generation Core i3, Pentium, and Celeron processor and the
C242 chipset support the following features:
• DDR4 288-pin memory support
• Support of SMBus speeds of up to 400KHz for BMC connectivity
• Improved I/O capabilities to high-storage-capacity congurations
• SPI Enhancements
• BMC supports remote management, virtualization, and the security package for enterprise
platforms
1.3 Special Features
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
1.4 System Health Monitoring
Onboard Voltage Monitors
An onboard voltage monitor will continuously scan the voltages of the onboard chipset,
memory, CPU, and battery. Once a voltage becomes unstable, a warning is given or an
error message is sent to the screen. The user can adjust the voltage thresholds to dene the
sensitivity of the voltage monitor. Real time voltage levels are displayed in IPMI.

Supermicro X11SCL-IF Specifications

General

PS/2 ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
ECC	Yes
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Maximum internal memory	64 GB
Supported memory clock speeds	2133, 2400, 2666, 2667 MHz
UEFI version	2.7
Thermal Design Power (TDP)	95 W
Supported RDIMM module capacity	4GB, 8GB, 16GB, 32GB
BIOS type	UEFI
ACPI version	6.0
BIOS memory size	256 Mbit
RAID levels	0, 1, 5, 10
Supported storage drive interfaces	SATA III
Wi-Fi	No
LAN controller	Intel I210
Ethernet interface type	Gigabit Ethernet
On-board graphics card model	Aspeed AST2500
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Processor socket	LGA 1151 (Socket H4)
Processor manufacturer	Intel
Compatible processor series	Intel Celeron, Intel Core i3, Intel Pentium, Intel Xeon
Processor number of cores supported	6
Component for	Server
Motherboard chipset	Intel C242
PC health monitoring	FAN, LED, Temperature, Voltage
Motherboard form factor	mini ITX
Number of SATA III connectors	4
Harmonized System (HS) code	84733020

Weight and Dimensions

Width	170.2 mm