Supermicro X11SSH-F User Manual

Chapter 4: BIOS
105
4.7 Boot Settings
This submenu allows the user to congure Boot settings for this system:
Boot Conguration
Boot Mode Select
Use this item to select the type of device to be used for system boot. The options are Legacy,
UEFI, and Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices from which the system will boot. Press
<Enter> on each entry from top to bottom to select devices.
• When the item above -"Boot Mode Select" is set to Dual (default), the following items will
be displayed for conguration:
Boot Option #1 - Boot Option #15
• When the item above -"Boot Mode Select" is set to Legacy, the following items will be
display for conguration:
Boot Option #1 - Boot Option #7
• When the item above -"Boot Mode Select" is set to UEFI, the following items will be display
for conguration:
Boot Option #1 - Boot Option #8

Supermicro X11SSH-F Specifications

General

IPMI LAN (RJ-45) port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Maximum UDIMM memory	64 GB
Number of DIMM slots	4
Supported DIMM module capacities	4GB, 8GB, 16GB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Supported memory clock speeds	1600, 1866, 2133 MHz
BIOS type	AMI
ACPI version	4.0
BIOS memory size	16 Mbit
RAID levels	0, 1, 5, 10
Supported storage drive interfaces	SATA III
On-board graphics card model	Aspeed AST2400
Processor socket	LGA 1151 (Socket H4)
Intel Xeon series	E3-1200
Processor manufacturer	Intel
Processor thermal power (max)	80 W
Wi-Fi	No
Ethernet interface type	Gigabit Ethernet
Number of SATA III connectors	8
Trusted Platform Module (TPM) version	1.2
Motherboard chipset	Intel® C236
Motherboard form factor	micro ATX

Weight and Dimensions

Width	224 mm