CHASSIS 8-41
REMOVAL
• Remove the seat, frame covers, frame front covers, pillion
rider handle and frame upper cover assembly. (8-4 to -6)
• Remove the left muffler. (6-2)
• Remove the rear wheel. (8-33)
• Unhook the return spring 1 and remove the right front foot-
rest bracket 2.
• Open the brake hose guide 3.
• Remove the rear shock absorber mounting bolts and nuts.
• Take out the rear shock absorber.
INSPECTION
• Inspect the shock absorber for damage and oil leakage, and
absorber bushing for wear and damage.
If any defects are found, replace the shock absorber with a
new one.
• Inspect the spacer for any flaws or other damage.
If any defects are found, replace the spacer with a new one.
• Insert the spacer into bearing and check the play when mov-
ing the spacer up and down.
If excessive play is noted, replace the bearing with a new one.
Do not attempt to disassemble the rear shock
absorber unit. It is unserviceable.
To Next Page
Loading...
Need help?
General
