18
1. Reinstall the battery in the battery box.
2. First connect the + lead to the + positive terminal
of the battery.
3. Cover + terminal with rubber boot.
4. Connect the - lead to the - negative terminal of
the battery.
5. Reinstall the battery holder.
6. Reinstall the prop stay.
7. Reinstall the seat.
A: + lead
B: - lead
C: Rubber boot
D: Battery holder
E: Prop stay
FRONT REAR
BRAKE FLUID
Keep the motorcycle upright and place the handlebars
straight.
Check the brake fluid level in both the front and rear
master cylinder reservoirs.
If the fluid level is below the “LOWER” level, add the
correct type of brake fluid.
Refer to the chart below for the proper selection.
Specification and Classification
DOT 4
Be careful not to spill any brake fluid on the
paint or plastic components as they will be
damaged.
LOWER
UPPER
LOWER
To Next Page
Loading...
Need help?
General
