33--11
3
Operating Program Install
When the machine is shipped out, the operating program is pre-installed and pre-set. However, when the program
was damaged or the settings need to be changed or upgraded, the installation of the program is required. In this
case, the program can be re-installed or the set values can be initialized.
■Use the SWF Install Program
1. If the machine operating program was not installed, the automatic link to the install menu is conducted as in
<Fig. 3.0-2>.
2.
Upon booting, the logo appears on the screen for two seconds as in <Fig. 3.0-1>. In case of pressing the frame left
and right move keys together when the logo appears on the screen, the install screen appears next. <Fig. 3.0-3>.
Motion
Status of Frame Move Keys On the Logo Screen
Frame Move Key
Moving to the SWF Install
Program
When the left and right keys are pressed
together
[Fig. 3.0-3][Fig. 3.0-2]
[Fig. 3.0-1]
To Next Page
Loading...
Need help?
General
