7.1.6 Floppy Diskette and Communications
600 No diskette.
There is no diskette inside the
FDD.
Insert a diskette into the FDD.
601 No sectors on the diskette
A floppy diskette is not formatted
or the format is different.
Format a diskette or replace it with
other diskette.
602 No design data in the diskette
There is no embroidery design
saved in a floppy diskette.
Replace the diskette.
603 Remove the write protect tap.
When copying embroidery designs, the
diskette write protect tap is enabled.
Disable the write protect tap.
604 Diskette damaged A floppy diskette is damaged. Format a diskette or replace it.
605 Insufficient memory capacity
There is unoccupied space for
copying in a floppy diskette.
Replace the diskette with a new one.
606 Diskette removed from FDD
A floppy diskette is removed in the
middle of FDD operation.
Insert the diskette and start are work
again.
607
Bad sector error during floppy
reading
The floppy diskette's sector is bad. Format the diskette or replace it.
608
Bad sector error during floppy
writing
The floppy diskette's sector is bad. Format the diskette or replace it.
609
Diskette error whose cause is
unknown
Errors are developed whose cause
is unknown while the floppy
diskette is in operation.
Format the diskette or replace it with
another one.
610 Diskette error
Errors are developed whose cause
is unknown, while the floppy
diskette is in operation.
Format the diskette or replace it with
another one.
640
650
Network device error
USB error
The network devices are not
connected.
The USB driver is not ready
Check the status of the network
devices.
Check whether the memory system
of the USB memory is FAT16.
630 Error found in the read data
The data read through the tape
reader develops errors.
Enter data through the tape reader
again.
614 Operating program install error
The operating program is installed,
the operating program file name
does not match or does not exist.
611 ZSK design error
612 BARUDAN design error
613 Bad sector error
No. Error Name Error Description Handling