55--6611
(1) Cut Needle Set
This function is to set the needle bar equipped with the specially designed cutting needle to cut the embroidery
fabric in the desired shape. To use this function, during embroidery, thread detection and trimming functions
shall be suspended. The cutting needle bar setting is the function to automatically suspend the unnecessary
functions, when the cutting function is used. <Fig. 5.4.7-2> is the screen where the “Cut Needle Set” is pressed
in <Fig. 5.4.7-1>. Pink means that the concerned needle bars were chosen for embroidery, and bright yellow
means that the needle bars were set for cutting.
<Fig. 5.4.7-2> shows that No. 4 Head is set as the cutting needle bar.
[Fig. 5.4.7-2]
To Next Page
Loading...
Need help?
General
