SystemAir SysAqua 25 Regulation Manual

English
Information
Lines identied with an i notify the user about specic operating statuses of the SysAqua but are
not considered as alarms.
This corresponds for instance to preheating the circuits by heating resistances or to the drop in
capacity if operating limits are approached.
1/3Alarm liste detail
08:13:33
Critical(A)
18.02.2016
1
+ Fault supp.pump: Alarm
1/4Alarm list
3
+ Suction T. circuit 1: Com. fault
+ Condensing P. circuit 1: Com. fault
+ Fault supp.pump: Alarm
Acknowledge
1/3Alarm liste detail
08:13:33
Critical(A)
18.02.2016
1
+ Fault supp.pump: Alarm
1/4Alarm list
3
+ Suction T. circuit 1: Com. fault
+ Condensing P. circuit 1: Com. fault
+ Fault supp.pump: Alarm
Acknowledge
3
1/2
Execute
1/4Alarm list
3
+ Suction T. circuit 1: Com. fault
+ Condensing P. circuit 1: Com. fault
+ Fault supp.pump: Alarm
Acknowledge
1/5Alarm history
+ i compressor oil heating
+ Suction T. circuit 1: Com. fault
+ Condensing P. Circuit 1:..
+ Fault supp.pump: Alarm
- i compressor oil heating
1/3Alarm hist.detail
18.02.2016
1
+ Fault supp.pump: Alarm
08:13:33
Critical(A)
24 SysAqua
6. ALARMS
If at least one alarm or warning is in progress, the alarm button ashes.
Press the 'Alarm' button to access the latest current alarm. The screen
displays the latest alarm activated with a description, the date and time at
which it occurred.
If the list of alarms is displayed, pressing the "Alarm" button takes you to the alarm history. Here again, the
detail of the alarms can be displayed (max. 50).
Pressing the button a second time gives access to the list of alarms and
warnings that are currently active. You can scroll the alarm list and obtain
details by clicking on the "Enter" button. To exit the alarm detail and return to the alarm list menu, press the
"Escape" button.
The rst "Remove" line is used to remove alarms that are not active but require acknowledgment. To do
this:
² Ensure that you have an "installation" or "maintenance"' access level
² select this line, validate and select "Execute".
The number on the rst line shows the number of alarms or warnings that are currently active.
In the alarm history, a line beginning with a + identies when an alarm or a warning is activated. A line
beginning with a - shows that the alarm or warning was reset or acknowledged.
6.1. ALARM MENU

SystemAir SysAqua 25 Specifications

General

Brand	SystemAir
Model	SysAqua 25
Category	Heat Pump
Language	English