5-30
MAINTENANCE
LUBRICATING THE SLEW BEARING
Warning
Do not slew while lubricating. Doing so is
dangerous, as you may get caught in the
machine.
1. Stop the engine with the machine in the
posture shown on the ļ¬gure above.
EVERY 50 HOURS
2. Use the grease gun to grease the grease
ļ¬tting (1).
3. Start the engine, lift the bucket and slew
clockwise 90Ā°.
4.īLower
ītheībucketītoītheīground,īandīthenī
stop the engine.
5. Repeat the steps 2 to 4 above three
times.
6. Wipe off the grease expelled from the slew
bearing and grease ļ¬tting.
To Next Page
Loading...
Need help?
General
