Tascam Sonicview 16 User Manual

9 – Various information displays
Error/alert type Message Meaning Note
Cooling FAN Error
Cooling FAN failure. The cooling fan has stopped.
Cooling FAN in motion.
The cooling fan has started
moving.
This is shown in gray on the
INFORMATION Screen ERROR
page as an error record.
This is not shown at the top of
the screen.
Prohibited Setting Alert
Clock master changed to Internal.
IF-AE16 cannot be clock master.
Even though an IF-AE16 cannot
be selected as the master clock,
it was, so the master clock was
changed to “INT”.
This could occur upon startup if
the SLOT card set as the master
clock was switched to an IF-
AE16 or IF-AN16/OUT when the
power was off.
Clock master changed to Internal.
IF-AN16/OUT cannot be clock
master.
Even though an IF-AN16/OUT
cannot be selected as the master
clock, it was, so the master clock
was changed to “INT”.
Slot Card Alert
SLOT [slot number] [card name]
installed.
An expansion card was installed
while the power was off.
Slot number: 1/2
Card name:
i IF-AE16 (AES)
i IF-AN16/OUT (Analog Out)
i IF-DA64 (Dante)
i IF-MA64/BN (MADI)
i IF-MA64/EX (MADI)
SLOT [slot number] was changed
from [old card name] to [current
card name].
The expansion card was changed
while the power was off.
Internal Dante Alert
Dante I/O Sample rate changed by
Dante Controller.
The internal Dante input/output
sampling frequency was changed
by Dante Controller.
Storage Media Alert
Unrecognized format (SD card).
An SD card with a format that
cannot be recognized was loaded.
Unrecognized format (USB
memory).
A USB flash drive with a format
that cannot be recognized was
loaded.
Record Alert
Recording stopped.
Media Full.
The medium did not have enough
capacity, so recording stopped.
Recording error.
Buffer overflow.
Recording stopped because a
buffer overflow occurred during
recording.
Recording stopped.
File limit reached.
Please change to another folder.
Recording stopped because the
total number of files in the folder
would exceed the system limit.
Switch to another folder.
Recording error.
SD card was removed.
Recording stopped because the
SD card was disconnected during
recording.
Play Alert
Play error. Buffer underrun.
Playback stopped because a
buffer underrun occurred during
playback.
Play error.
[Media name] was removed.
Playback stopped because the
media was disconnected during
playback.
Media name:
SD card
USB
SB-16D mounting error
SB-16D ID #xx-xx has been
disconnected
A mounted SB-16D has been
disconnected from the Dante
network and became virtually
mounted.
xx = 1 – 16
SB-16D mounting alert SB-16D ID#xx-xx connected.
A virtually mounted SB-16D has
been connected to the Dante
network and became mounted.
xx = 1 – 16
This message will not be shown
if this alert occurs within three
minutes of starting up.
TASCAM Sonicview 16/Sonicview 24 V1.1.0 189

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English