Tascam Sonicview 16 User Manual

4 – Mixer configuration and settings
7 Settings list
o This shows channel sets and custom layers that can be set
for LAYER KEY 1–7.
o To change a setting, swipe the list up and down. The
setting can also be changed by turning LCD knob 8 (lit
blue).
o Settings that can be selected are as follows.
Model Option
Sonicview 16
CH 1–16
CH 17–32
CH 33–40 / ST IN / FX RTN
MIX 1–16
MIX 17–22 / MAIN L/R
DCA
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CUSTOM 5
CUSTOM 6
CUSTOM 7
Sonicview 24
CH 1–24
CH 25–40 / ST IN / FX RTN
MIX 1–22 / MAIN L/R
DCA
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CUSTOM 5
CUSTOM 6
CUSTOM 7
8 CANCEL button
Tap this button to cancel setting changes and close to the
layer settings screen.
9 APPLY button
Tap this button to confirm setting changes and close to the
layer settings screen.
0 Scroll knob icon
This icon shows that LCD knob 8 (lit light blue) can be used
to scroll.
Default settings for LAYER KEY 1–7
The factory default settings are as follows.
Sonicview 16
Key Lit color Assigned function
LAYER 1 Blue CH 1–16
LAYER 2 Blue CH 17–32
LAYER 3 Blue CH 33–40 / ST IN / FX RTN
LAYER 4 Orange MIX 1–16
LAYER 5 Orange MIX 17–22 / MAIN L/R
LAYER 6 Yellow DCA
LAYER 7 Pink CUSTOM 2
Sonicview 24
Key Lit color Assigned function
LAYER 1 Blue CH 1–24
LAYER 2 Blue CH 25–40 / ST IN / FX RTN
LAYER 3 Orange MIX 1–22 / MAIN L/R
LAYER 4 Yellow DCA
LAYER 5 Pink CUSTOM 1
LAYER 6 Pink CUSTOM 2
LAYER 7 Pink CUSTOM 3
Custom Layer SETUP page
The modules assigned to custom layers and the modules
assigned to the master fader can be set in the settings list on
this screen.
Tap Menu Screen > Front Panel Setup > Layer/Master Fader
Setup to open the Layer Key Setup page. Then, tap the Custom
Layer Setup button to open this page.
1 Page selection buttons
Tap these buttons to switch the page shown.
TASCAM Sonicview 16/Sonicview 24 V1.1.0 51

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English